De-watering Pumps
Our Products

Dewatering Pumps forConstruction & Basements

Pump out water.Fast, clean, reliable.

For flooded basements, excavations and rain-hit sites, our submersible dewatering pumps move water quickly with minimal setup. Lightweight, rugged and service-friendly,built for contractors who can’t afford downtime.

Quick Specs (at a glance)

  • Flow: up to 100 m³/hr
  • Head: up to 30 m
  • Type: Submersible drainage/dewatering (portable or guide-rail)
  • Protection: Thermal overload, IP68 motor
  • Sealing: Double mechanical seal with oil chamber
  • Build: Abrasion-resistant hydraulics; SS hardware
  • Power: 1Ø/3Ø, 50 Hz (wide model range)
MG Projects: De-watering Pumps

Why this dewateringpump wins

  • High flow, quick setup: Drop in, connect hose, power on,water gone.
  • Portable & tough: Compact body, carry handle, impact-resistant base/strainer.
  • Lower clog risk: Semi-open impeller handles silt and small soft solids (model-dependent).
  • Protection built-in: Thermal overload and double seals for long service life.
  • Flexible install: Guide-rail auto-coupling for pits or portable hose discharge for rapid jobs.
MG Projects: De watering Pumps

What’sincluded

  • Submersible dewatering pump with cable
  • Control box (as required) / plug-and-play options
  • Float switch for automatic start/stop (optional)
  • Discharge hose/couplings, NRV, and lifting chain (as per site)

Need to move heavier slurry? Ask for our sludge/slurry pump variants.

MG Projects: De watering Pumps

Applications(Best Fit)

  • Construction excavation
  • Basements & parking lots
  • Lift pits & utility shafts
  • Tunnels, mines & quarries
  • Storm-water pits
  • Tank cleaning & emergency flood relief

How itworks (simple)

  • Place the pump at the lowest point of the pit/sump.
  • Connect discharge hose to the rising main or storm drain.
  • Pump starts (manual or float) and dewaters to safe level; NRV stops backflow.

TechnicalHighlights

  • Double mechanical seal in oil bath; serviceable seal cartridge.
  • Abrasion-resistant impeller/volute for silt-laden water.
  • Cable entry with strain relief & watertight gland.
  • Duty philosophy: For continuous sites, use 1W + 1S with auto-alternation.
  • Medium: Clear/dirty water with fine silt; avoid large stones or metallic debris.

FAQs

Dewatering pumps move water with fine silt at high flow. Sludge/slurry pumps handle heavier solids but at lower flow,tell us your medium and pipe size.

Yes,share kW and starting current; we’ll size the generator and cable.

Both. Float for automatic level control; manual for spot draining.

Give pit dimensions, inflow rate, discharge height/length, pipe size & elbows. We’ll calculate duty point (flow vs head) and recommend the right model.

No,like most submersibles, brief exposure is okay but avoid prolonged dry-run. Use a float switch for safety.

Need Support?

Our technical support team is available 24/7 to assist with any emergency situations or technical queries.

Support Number
+91 97129 08215

Request a Consultation